1. Check the clutch pedal free travel is too large, and adjustment.
2. Check the separation lever height is the same, is too low. Toggle release fork in the car, so that the tip lightly against the separation of the bearing surface of the inner lever disengaging end, turn the clutch week view, if the separation of the inner end of the lever and simultaneously separating bearing contact is not on, indicating that the height of the separation lever inconsistent, should be adjusted. If the separation lever highly consistent, still not completely separated, it is necessary to check the lever height. Each separate lever transferred the same height, if complete separation, indicating that the original improperly adjusted or wear off even. After separation adjustment lever, free travel must re-adjust the clutch pedal.
3. If after the adjustment to normal, still not completely separated, it is necessary to remove the clutch, check the driven plate is installed backwards, axial movement is difficult, the main driven plate without warping, separation lever screw is loose, floating pin is off.
4, the new riveting friction plate clutch, to check the driven plate and friction plate is too thick. If too thick, you can add shims between the clutch cover and flywheel.
5, for the hydraulic transmission clutch, in addition to the inspections, should also check whether the lack of brake fluid, pipe leaks and exhaust air in the hydraulic system. |
